Rytons AC7HPWCWL Cowled, Baffled & Controllable Wall Vent. The equivalent area of this vent is 6,700mm²
00077
€45.00
In stock
1
Product Details
Product description
Rytons AC7HPWCWL wall vent is an 127mm diameter anti draught wall vent that has a verified equivalent area of 6,700mm² which is required with some retrofit ventilation projects. The vent has internal baffles and a unique draught reducing panel which can be manually adjusted with an easy push/pull or tilt action allowing air to be controlled as required. The vent is further draught proofed with the vent cowl which is fitted over the external grille.
Key features
Purchase 5 or more at €42.50 each
Purchase 10 or more at €40.00 each
Rytons controllable anti draught vent with an equivalent area of 6,700mm²
Ideal for retrofit properties that require one vent in each room with a free area of 6500mm²
Allows the introduction of fresh outside air into the room to disperse moisture, odors and other airborne pollutants
Diameter 127mm
The tube contains a light and draught reducing system of baffles
Unique draught reducing panel manually adjusted with an easy push/pull or tilt action allowing air to be controlled as required
Paint or wallpaper the panel to match room décor for a discreet appearance
External cowl protects against excessive weather conditions and alleviates air blasts through the cavity
External grille U.V. stabilized to slow down the effects of sunlight
Position at a high level (typically 1.7m above floor level) for all dwelling types and story heights
White external grille
Cowl: 217mm L x 210mm H x 93mm D
External grille: 166mm L x 160mm H
Tube: 127mm (5″) Dia. x 358mm L (if required, a maximum 63mm may be cut from each end of the tube)
