Product description

Rytons AC10HPW wall vent is an 127mm diameter anti draught wall vent that has a verified equivalent area of 7,500mm² which is required with some retrofit ventilation projects. The vent has internal baffles and a unique draught reducing panel which can be manually adjusted with an easy push/pull or tilt action allowing air to be controlled as required.

Key features

• Purchase 4 or more at €33.90 each
• Purchase 8 or more at €30.90 each
• Purchase 12 or more at €28.90 each
• Rytons controllable anti draught vent with an equivalent area of 7,500mm²
• Ideal for retrofit properties that require one vent in each room with a free area of 7,500mm²
• Allows the introduction of fresh outside air into the room to disperse moisture, odors and other airborne pollutants
• Diameter 127mm
• The tube contains a light and draught reducing system of baffles
• Unique draught reducing panel manually adjusted with an easy push/pull or tilt action allowing air to be controlled as required
• Interior panel is magnolia. Paint or wallpaper the panel to match room décor for a discreet appearance
• External grille U.V. stabilized to slow down the effects of sunlight
• Position at a high level (typically 1.7m above floor level) for all dwelling types and story heights
• White external grille
• External grille: 166mm L x 160mm H
• Tube: 127mm (5″) Dia. x 358mm L (if required, a maximum 63mm may be cut from each end of the tube). Rytons Aircore tube extension and tube connector are available for walls of a greater depth
• LookRyt® panel: 172mm L x 172mm H
• IMPORTANT: Do not fit the two parts of the LookRyt® panel together before starting
• Align and screw the LookRyt® backplate to the wall through the corner fixing points. When happy with the positioning of the backplate, push fit the face plate on to finish. The grille may then be opened and closed with a push/pull or tilt action
• Free delivery

Product data sheet