Product description

The BSK Zephyr single room heat recovery unit Includes advanced features such as built-in Wi-Fi, remote control and app control, the BSK ZEPHYR V2 is a future-proof solution that offers functions that are otherwise only seen on much more expensive models.

BSK Zephyr can recover heat by using a 2-way fan heating and cooling of the ceramic heat exchanger inside. The device operates on a cycle that extracts and supplies air in periods of 70 seconds. While the air is extracted out from the room, the ceramic heat exchanger will be heated, when the air flow direction is reversed and fresh air from outside is supplied to the room, thanks to the heat stored in the ceramic core, it will be blown inside in a conditioned manner. BSK Zephyr, whose power consumption does not exceed a few watts and can reach 90% thermal efficiency, also allows you to save energy while meeting your ventilation needs. You can connect multiple devices to each other via wi-fi, and you can control your devices with the included IR remote.

True silent operation with an ultra-low 3.6 dBA on night-time mode and 27.3 dBA on high boost. During operation, the inner grille will open depending on the chosen airflow rate and if the unit is not being used the grille will close over with a foam seal. A pipe hole diameter of 165-180mm is required and can be used on walls from 250mm to 500mm due to the telescopic wall liner. An extension piece can be added (optional accessory) to extend the wall thickness capacity up to 750mm. An additional metal 'Thin Wall Cowl' (optional accessory) can be installed to the external wall allowing the unit to be fitted to a wall as narrow as 190mm. Integral humidity sensor with 3 humidity monitoring levels. When a set humidity is reached, the device will enter exhaust mode to dispense excess humidity.

Set your unit up for any situation with a press of a button and will allow for either heat recovery of up to 90% or simply extract warm or humid air or even just supply fresh air in from outside. Integral humidity sensor with 3 humidity monitoring levels. When a set humidity is reached, the device will enter exhaust mode to dispense excess humidity.

Key features

• High heat recovery efficiency of up to 90%.
• App control via phone App (v2)
• IR handheld speed controller supplied with unit
• Wi-Fi pairing between and programming between units
• Internal humidity sensor
• 4 speed settings
• Delivers an airflow of 15 - 60m³ per hour (16 l/s),
• Suitable for areas up to 50m².
• Ultra Quiet energy efficient Motor 24-48 dBa
• Easy to service filters
• Ceramic heat recovery core
• Anti draft damper when not in use
• Optional External colored cowls available
• Optional Thin wall cowl available
• 24-month warranty
• Easy to install
• Free delivery

Product data sheet

Back to Shop